Our product range can give you an overview of the steel grades that are most often requested by our customers. If you cannot find your product in this list please do not hesitate to request a quote. We can also satisfy many unusual demands. 

Most of the listed grades can be delivered as both plates and coils up to 20 mm, above that we only offer plates. Surface options can be found at the bottom of this page. On request we can also supply bulb plate (1M), patterned plate (1M) and perforated plate.

We also offer mechanical processing for stainless steel. We have modern machines for turning, milling and drilling. Additionally we can produce plasma cut blanks.

General stainless steel

General stainless steel; hot-rolled with WZ 3.1B ADW-2
Mat.-No.Grade (standard)ThicknessLength (max)Width (max)Note
Ferritic stainless steel
1.4000X6Cr133,00 - 150 mm12000 mm3500 mm 
1.4003X2CrNi12 
1.4016X6Cr17 
1.4509X2CrTiNb18 
1.4510X3CrTi17 
1.4512X2CrTi12 
Austenitic stainless steel
1.4307X2CrNi18-93,00 - 150 mm12000 mm3500 mm 
1.4432X2CrNiMo17-12-3 
1.4436X3CrNiMo17-13-3 
1.4439X2CrNiMoN17-13-5 
1.4547X1CrNiMoCuN20-18-7 
1.4550X6CrNiNb18-10 
1.4565X2CrNiMnMoN25-18-6-5 
1.4580X6CrNiMoNb17-12-2 
Martensitic stainless steel
1.4021X20Cr133,00 - 150 mm12000 mm3500 mm 
1.4028X30Cr13 
1.4031X39Cr13 
1.4034X46Cr13 
1.4528X105CrCoMo18-2 
1.4542X5CrNiCuNb16-4 
Austenitic-ferritic stainless steel
1.4462X2CrNiMoN22-5-33,00 - 150 mm12000 mm3500 mm 

Alloyed stainless steel

Alloyed stainless steel; hot-rolled with WZ 3.1B ADW-2
Mat.-No.Grade (standard)ThicknessLength (max)Width (max)Note
1.4006X12Cr133,00 - 150 mm12000 mm3500 mm 
1.4301X5CrNi18-10 
1.4306X2CrNi19-11 
1.4313X3CrNiMo13-4 
1.4404X2CrNiMo17-12-2 
1.4435X2CrNiMo18-14-33,00 - 150 mm12000 mm3500 mm 
1.4529X1NiCrMoCuN25-20-7 
1.4539X1NiCrMoCu25-20-5 
1.4541X6CrNiTi18-10 
1.4571X6CrNiMoTi17-12-2 

Stainless, acid and heat-resistant steel

Stainless, acid and heat-resistant steel; hot-rolled with WZ 3.1B ADW-2
Mat.-No.Grade (standard)ThicknessLength (max)Width (max)Note
1.4310X10CrNi18-83,00 - 150 mm12000 mm3500 mm 
1.4401X5CrNiMo17-12-2 
1.4438X2CrNiMo18-15-4 

Heat-resistant steel

Heat-resistant steel; hot-rolled with WZ 3.1B ADW-2
Mat.-No.Grade (standard)ThicknessLength (max)Width (max)Note
1.4713X10CrAlSi73,00 - 150 mm12000 mm3500 mm 
1.4724X10CrAlSi13 
1.4742X10CrAlSi18 
1.4762X10CrAlSi25 
1.4828X15CrNiSi20-12 
1.4833X12CrNi23-133,00 - 150 mm12000 mm3500 mm 
1.4841X15CrNiSi25-21 
1.4845X8CrNi25-21 
1.4864X12NiCrSi35-16 
1.4876X10NiCrAlTi32-21 
1.4878X8CrNiTi18-10 

Additional information

We offer the following surface characteristics:
1U: hot-rolled, not heat-treated, not descaled
1C: hot-rolled, heat-treated, not descaled
1E: hot-rolled, heat-treated, mechanically descaled
1D: hot-rolled, heat-treated, pickled
1M: Patterned

Please note that we cannot offer all grades with every surface characteristic.

Lengths are only valid for plates.